Keeping Machinery running all over the World
Menu
Home » Produkte » Fett-Schmierung » PDI System » EGM II

PDI plus Progressive Twin Electric Pump (for "T" series pumps)

EGM II

This pump is small, low cost,
and only for our original cartridge grease.

 

Specifications

Power DC24V 
Power Consumption 45.6W
Discharging pressure 8MPa (Only for LHL System)

1 0MPa
Maximum discharging time Below 7m 30s
Interval time 3 times discharging time
Wiring method Terminal connection
Manual override switch With(Optional: Only PDI system) *
Grease level switch With
Solenoid cover Non combustible plastic (UL94-V0)  
Protection class IP54
CE approval With
Pump air bleeding With restriction
* Although the Manual Override Switch provides a dry contact to activate the pump, its capacity is not sufficient to sustain the power required to operate the pump. Therefore, the power needs to be provided directly to the pump from the machine control panel.

 

Directions for use

  • Use recommended grease.
  • Never use molybdenum disulfide-contained grease.
  • Use lithium greases. (Contact us for consultation when other than lithium grease is used.)
  • Do not use any greases containing substances that attack brass and rubber.
  • When the cartridge is changed, pay attention that foreign particles are not getting inside.
  • Do not discharge continuously.
  • After changing the cartridge, bleed the air inside the pump by opening the air bleeding valve.

HOW to order

cord-g036

Hydraulic circuit diagram – T-type

kairo-g036

Hydraulic circuit diagram – S-type

g037-kairo-s

Dimensional drawing EGM II – 10S-4-7CLFB

g-036_gai_47cfb

Dimensional drawing EGM II – 10T-4-7CL

g-036_gai_47cl

Wiring diagram

g-036_ketu

Grease level switch

g-037_grease