Keeping Machinery running all over the World
Menu
Home » Produkte » Fett-Schmierung » Positive Displacement Injector (PDI) » EGM (Cartridge)

  • Use recommended greases.
  • Never use molybdenum disulfide-contained grease.
  • Use lithium greases. (Contact us for consultation when other than lithium grease is used.)
  • Do not use any greases containing substances that attack brass and rubber.
  • When refilling, take care not let foreign matter in the grease.
  • Avoid continuous operation.
  • After refilling, always press AIR BLEED push button to purge the pump of air.
  • When refilling grease in main pipe and during test operation, stick to an intermittent cycle of running for 30 seconds and resting for 90 seconds. Failure to follow this requirement will result in thermal protector being activated by a heated solenoid, leaving the solenoid de-energized without pressure built up.
  • For system planning information, click here.
  • * Should the pump malfunction, contact us for immediate response with substitution.

Drawing

Hydraulic circuit drawing

Wiring digram

Wiring digram

 

Dimensional drawing[EGM-10S-4-4C]

Dimensional drawing[EGM-10S-4-4C]

Dimensional drawing[EGM-10S-4-2C]

Dimensional drawing[EGM-10S-4-2C]

Dimensional drawing[EGM-10S-4-7C]

Dimensional drawing[EGM-10S-4-7C]