Keeping Machinery running all over the World
Menu
Home » Produkte » Öl-Schmierung » Positive Displacement Injector (PDI) System for Large Machines » MOS

Positive Displacement Injector(PDI) System for Large Machines

Compact Positive Displacement Injector Valve (MOS) MOS

MOS metering valve is the compact version of MO Valve.Up to four different outputs are available.

Ideal for small machines or machines with limited installation space.

Model

Model Part Number Didcharge volume (ml) Mark
MOS-1 205300 0.01 1
MOS-3 205301 0.03 3
MOS-5 205302 0.05 5
MOS-10 205303 0.1 10

Specifications

Discharge volume 0.01, 0.03, 0.05, 0.1ml/stroke
Operating pressure 0.9MPa
Reset pressure 0.3MPa

Adapter (SAS)                                                Plug (BPS)

Adapter (SAS)  Plug (BPS)

Model

Model Part Number
SAS 619293
BPS 619219

Directions for use

Directions for use

  • When installing the valve on a junction side, screw it into place with a wrench applied to the valve body (Tightening torque : 50kgf·cm )
  • When connecting the valve to piping, turn bushing holding nipple with a wrench.
  • For system planning information,Contact us

Drawing

Piping Layout

Necessarily match the layout in Figure 1 is an example.

Piping Layout

Use an appropriate sealant where mark shown.

Mark denote tightening torque. See the tightening torque list. P.219b0

Operational squence

Operational squence

Dimensional drawing

Dimensional drawing