Keeping Machinery running all over the World
Menu
Home » Produkte » Öl-Schmierung » (SLR) Single Line Resistance compact system for small machines to large machines with continuous (rec) » ACM-II AMI-300 AMI-1000

Continuous (Recirculation) System for Small - Large Machines

Motor driven continuous gear pump ACM-II·AMI-300·AMI-1000

  ACM-II AMI-300 AMI-1000
Pump Discharge
volume
60ml/min (50Hz)
70ml/min (60Hz)
300ml/min (50Hz)
330ml/min (60Hz)
1000ml/min (50Hz)
1100ml/min (60Hz)
Discharge
pressure
0.8MPa
(safety valve setting)
0.8MPa
(safety valve setting)
0.8MPa
(safety valve setting)
Mortor
( Other
voltages
available.)
Voltage
/ Current
AC100V?1/0.6A
(Condenser: 8µF)
AC200V?3/0.3A
AC100V?1/1.4A
(Condenser: 11µF)
AC200V?3/0.35A
AC100V?1/2.0A
(Condenser 20µF)
AC200V?3/0.8A
Output 30W
Induction motor
50W
Induction motor
75W
Induction motor
Operation rate Continuous
Working viscosity range 32-1300mm2/S 65-1300mm2/S
Reservoir capacity 2l,3l,4l,8l (sheet metal)
Weight 4.0kg 4.4kg 7.1kg
Other Motor rotary direction:
Counter- clockwise
Motor rotary direction:
Clockwise
Motor rotary direction:
Counter- clockwise
External fuse 100V/1A
200V/0.5A
100V/2A
200V/1A
100V/3A
200V/1A

How To Order

How To Order

Model

Model Part Number
ACM-II-1 102484
ACM-II-2 102486
AMI-1000-1 202132
AMI-1000-2 202131
Model Part Number
AMI-1000-3 202275
AMI-300-1 202035
AMI-300-2 202036
   

Directions for use

  • Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table.
  • Oil viscosity varies with oil temperature. Be sure to use oil within specified working viscosity range. Click here to viewo the viscsity list.
  • Do not use any special additive-contained oil, water soluble oil and solvent.
  • Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change.
  • Make sure that proper voltage and pressure are proper.
  • Do not overtighten the discharge joint.
  • Refer to the tightening torque table.
  • For system planning information, Contact us.
  • * Should the pump malfunction, Contact us for immediate response with substitution.

AMI-1000

Drawing

Hydraulic circuit drawing

Hydraulic circuit drawing

Wiring digram

Wiring digram

Dimensional drawing

Dimensional drawing