Keeping Machinery running all over the World
Menu
Home » Produkte » Öl-Schmierung » (SLR) Single Line Resistance compact system for small machines with intermittent delivery » AMR-III DS

Low Cost, Compact System for Small Machines

Automatic intermittent gear pump AMR-III DS

Capable of operation over a wide working viscosity range. Digital display tells how the pump is doing on sight. Control by timer and counter is selectable.

1,8l  3,0l

        1,8l                                 3,0l

Specifications

Pump Discharge
volume
150ml/min (50Hz) 180ml/min (60Hz)
Discharge
pressure
0.8MPa (safety valve set pressure)
Mortor Power AC100V?1/0.83A, AC200V?1/0.41A (50Hz)
AC100V?1/0.64A, AC200V?1/0.33A (60Hz)
Output 20W (50Hz/60Hz) Capacitor motor
Oil level switch
(option)
Timer
Discharge time adjustable range: 1-99 seconds
(2.5-247.5ml) 50Hz, (3-297ml) 60Hz
Interval time adjustable range: 1 to 9999 minutes
1 to 9999 counts

*Please specify when ordering if you want to count control.
Abnormal
output
Contact type A Contact (NO)
Contact capacity AC250V 1.5A
Abnormality
detection
Oil level pressure
Oil level
switch
Contact type A Contact (NO) ON at low level
Prerssure
switch
Contact type A Contact (NO)
Operating pressure: 0.14MPa ON
Reset pressure : 0.07MPa OFF
Liquid crystal
display
INTERVAL display ''INT''
DISCHARGE display ''DIS''
ALARM When oil side decreases,
display ''OILLEVEL ERR''
When pressure is abnormal,
display ''PRESSURE ERR''
Working
viscosity
range
68-1300mm2/S(50Hz)
Reservoir
capacity
1.8l,3l (plastic) 3l,4l,8l (sheet metal)
Weight 1.8l Reservoirs: 3.2kg, 3l Reservoirs: 4kg

How To Order

How To Order

Model

Model Part Number
AMR-III DS-1 112141
AMR-III DS-2 112142
AMR-III DS-1-3 112143
AMR-III DS-2-3 112144

Directions for use

  • Do not remove the oil strainer to keep the pump clear of foreign matter.
  • Replace or clean the suction filter at least once a year. Click here to view the service list.
  • Oil viscosity varies with oil temperature. Be sure to use oil within specified working viscosity range. Click here to view the viscosity list.
  • Do not use any special additive-contained oil, water soluble oil and solvent.
  • Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change.
  • Make sure that proper voltage and pressure are proper.
  • Do not overtighten the discharge joint. Refer to the tightening torque table.
  • For system planning information, Contact us.
  • * Should the pump malfunction, Contact us for immediate response with substitution.

Drawing

Controller Setting

Controller Setting

Hydraulic circuit drawing

Hydraulic circuit drawing

 

Wiring digram

Wiring digram

Dimensional drawing

Dimensional drawing