Keeping Machinery running all over the World
Menu
Home » Produkte » Öl-Schmierung » (SLR) Single Line Resistance compact system for small machines with intermittent delivery » MLZ

Low Cost, Compact System for Small Machines

Compact Automatic Intermittent Piston Pump MLZ

Compact version of MMXL-III. Ideal for small machines with limited installation space.

Standard  CE

      Standard                  CE

Specifications

Pump Discharge volume 1.5?2.5ml/stroke
Discharge pressure 0.3MPa
Mortor Voltage / current AC100V?1/50mA, AC200V?1/25mA (50Hz)
AC100V?1/42mA, AC200V?1/18mA(60Hz)
Output 3W Synchronous
Emergency detection Oil level
Oil level switch
Contact type A Contact (NO) ON at low level
Contact capacity 0.5A, AC DC200V/30W smaller
Operation rating Continuous
Working viscosity range 30?1300mm2/S
Reservoir capacity 0.8l
Weight 1.2kg
Protection class IP54 (CE Approved type)

How To Order

How To Order

Model

Model Part Number
MLZ-A-1 362801
MLZ-A-1L 362806
MLZ-A-2 362901
MLZ-A-2L 362906
MLZ-B-1 362802
MLZ-B-1L 362807
MLZ-B-2 362902
MLZ-B-2L 362907
MLZ-C-1 362803
MLZ-C-1L 362808
MLZ-C-2 362903
MLZ-C-2L 362908
MLZ-CE-A-1 367201
MLZ-CE-A-1L 367216
MLZ-CE-A-2 367206
MLZ-CE-A-2L 367221
MLZ-CE-B-1 367202
MLZ-CE-B-1L 367217
MLZ-CE-B-2 367207
MLZ-CE-B-2L 367222
Model Part Number
MLZ-CE-C-1 367203
MLZ-CE-C-1L 367218
MLZ-CE-C-2 367208
MLZ-CE-C-2L 367223
MLZ-CE-D-1 367204
MLZ-CE-D-1L 367219
MLZ-CE-D-2 367209
MLZ-CE-D-2L 367224
MLZ-CE-E-1 367205
MLZ-CE-E-1L 367220
MLZ-CE-E-2 367210
MLZ-CE-E-2L 367225
MLZ-D-1 362804
MLZ-D-1L 362809
MLZ-D-2 362904
MLZ-D-2L 362909
MLZ-E-1 362805
MLZ-E-1L 362810
MLZ-E-2 362905
MLZ-E-2L 362910

Replacement Motor Model

Interval 6min 15min 30min 60min 120min
Mortor RPM (50Hz) 10 4 2 1 1/2
Replacement Motor Model 100V M-B1 M-C1 M-D1 M-E1 M-F1
200V M-B2 M-C2 M-D2 M-E2 M-F2

Model

Model Part Number
M-B1 521194
M-C1 521193
M-D1 520062
M-E1 520061
M-F1 520060
Model Part Number
M-B2 521196
M-C2 521195
M-D2 520067
M-E2 520066
M-F2 520065

Directions for use

  • Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table.
  • Oil viscosity varies with oil temperature. Be sure to use oil within specified working viscosity range. Click here to view the viscosity list.
  • Do not use any special additive-contained oil, water soluble oil and solvent.
  • Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change.
  • Make sure that proper voltage and pressure are proper.
  • Do not overtighten the discharge joint. Refer to the tightening torque table.
  • Do not press the discharge volume adjusting knob down by force.
  • Adjust discharge volume only when the piston is fully relaxed ( The knob is at the lowest position.).
  • For system planning information, Contact us.
  • * Should the pump malfunction, Contact us for immediate response with substitution.

Discharge Volume Adjustment

Discharge Volume Adjustment

Drawing

Hydraulic circuit drawing

Hydraulic circuit drawing

Wiring digram

Wiring digram

Dimensional drawing

Dimensional drawing